|
Mục lục |
Specification-Thông Số Kỹ Thuật |
|
Power supply |
Rated supply voltage |
Three-phase 340V-10%～460V+10%, 50～60Hz±5%, voltage imbalance rate<3% |
|
Output |
output voltage |
The maximum output voltage is the same as the input supply voltage |
|
Output current rating |
100% rated current continuous output |
|
Maximum overload current |
Heavy-duty models: 150% rated current for 60s, 180% rated current for 10s, 200% rated current for 2s |
|
Basic Control Functions |
Drive mode |
VVF, SVC |
|
Input |
Frequency (speed) input, torque input |
|
Start-stop control method |
Keyboard, control terminal (two-wire control, three-wire control), communication |
|
Frequency control range |
0.00～600.00Hz |
|
Input frequency resolution |
Digital input: 0.01Hz/0.1Hz Analog input: 0.1% of maximum frequency |
|
Speed range |
1:50（VVF,1:200（SVC） |
|
Speed Control Accuracy |
±0.2% Rated synchronous speed |
|
Acceleration& deceleration time |
0.01s～600.00s |
|
Voltage/Frequency Characteristics |
The rated output voltage is adjustable from 20% to 100%, and the base frequency is adjustable from 1Hz to 600Hz/3000Hz |
|
Torque boost |
Fixed torque boost curve, optional V/F curve |
|
Starting torque |
150%/1Hz（VVF 150%/0.25Hz（SVC） |
|
Torque Control Accuracy |
±8% rated torque (SVC) |
|
Output voltage self-adjusting |
The input voltage changes, the output voltage remains basically unchanged |
|
Automatic current limit |
Automatically limit the output current to avoid frequent over-current tripping |
|
DC braking |
Braking frequency: 0.01~maximum frequency Braking time: 0~30S Braking current: 0%~150% of rated current |
|
signal input source |
Communication, multi-speed, analog, etc. |
|
Input&Output function |
Reference power |
10V/20mA |
|
Terminal Control Power |
24V/100mA |
|
digital input terminal |
6-way digital multi-function inputs: |
|
Analog input terminal |
2-way analog input; 1-way (AI1) voltage source 0-10V input; 1-way (AI2) voltage source 0-10V input or current source 0-20mA input optional; |
|
Digital output terminal |
1-way open collector multi-function output and 1-way relay multi-function output. Collector output maximum output current 50mA; relay contact capacity 250VAC/3A or 30VDC/1A, EA-EC normally open, EB-EC normally closed |
|
Analog output terminal |
M1: 0~10V multi-function analog output terminal, the maximum output current is 2mA |
|
Keyboard |
LED Display |
LED digital tube displays relevant information of the inverter |
|
Protection |
Protection |
Short circuit, overcurrent, overvoltage, undervoltage, phase loss, overload, overheating, load loss and external faults, etc. |
|
Use Conditions |
Installation site |
Indoor, below 1 km above sea level, free from dust, corrosive gas and direct sunlight |
|
Applicable environment |
-10℃～+40℃ , 5%～95%RH(no condensation) |
|
Vibration |
<0.5g |
|
Storage environment |
-40℃～+70℃ |
|
Installation method |
Wall-mounted, cabinet-mounted |
|
Protection Level |
IP21（With plastic baffle） |
|
Cooling method |
Forced air cooling |
