EM760 Series Inverter
Three-phase AC 340V-460V 0.75kW-710kW
660V-690V 18.5kW-800kW
The EM760 series inverter is a high-performance vector control inverter launched by SINEE, which integrates the synchronous motor drive and asynchronous motor drive. It supports three-phase AC asynchronous motors and permanent magnet synchronous motors; drive control technologies, such as the improved vector VF control technology (VVF), speed sensorless vector control technology (SVC) and speed sensor vector control technology (FVC); speed output and torque output; Wi-Fi access and background software debugging; expansions such as I/O expansion cards, communication bus expansion cards and PG cards.
Features of the EM760 series inverter:
1.Standard built-in C3 filter to meet the high requirements of electromagnetic compatibility
2.Built-in DC reactor to reduce input current distortion and increase the power factor
3.Standard LCD panel, easy to operate
4.Integration of the permanent magnet synchronous motor / asynchronous motor / permanent magnet synchronous reluctance motor / high-speed motor drive
5.Mainstream bus expansion cards: PROFINET, CANopen, EtherCAT
6.PG cards: OC, differential, UVW, resolver PG card, sine and cosine PG card
EM730 series Inverter
Single-phase/three-phase 220V-240V 0.4kW-2.2kW
Three-phase AC 340V-460V 0.75kW-450kW
The EM730 series inverter is a high-reliability general-purpose inverter launched by SINEE. EM730 supports three-phase AC asynchronous motors
and permanent magnet synchronous motors. They support a variety of drive control technologies, such as the vector VF (VVF) control and
speed sensorless vector control (SVC); speed output and torque output; and Wi-Fi access and background
Features of the EM730 series inverter:
1.Support the mobile APP and Wi-Fi module to facilitate inverter debugging and monitoring
2.Reliable operation with full load at 50°C ambient temperature
3.Integration of special functions for rewinding and unwinding
4.Support the high-frequency output up to 3000Hz for driving high-speed motors
5.Support the 100kHz high-speed pulse input
6.Metal substrate should adapt to the vibratory environment to reduce the induced voltage of the motor.
7.Built-in filter is close to Level C3.
EM600\660 series
High-Performance Vector Control Inverter
Three-phase 380~415V 0.75~560kW
Three-phase 660~690V 18.5~220kW
The EM600 series inverter is a high-performance vector control inverter launched by SINEE. It supports three-phase AC asynchronous motors and permanent magnet synchronous
motors; drive control technologies, such as the improved vector VF control technology (VVF), speed sensorless vector control technology (SVC) and speed sensor vector control
technology (FVC); speed output and torque output; expansions such as I/O expansion cards, communication bus expansion cards and PG cards.
The EM600 series high-performance vector inverter
has the following features:
1.High torque control accuracy
2.Wide speed range and high control accuracy
3.Low-frequency carrier: VVF/1Hz/150%, SVC/0.25Hz/150%FVC/0Hz/150%
4.Support I/O expansion
5.Support communication bus expansion: 485 bus, Profibus-DP network, CANopen network;
6.Support various encoders: ABZ incremental, UVW incremental, UVW wire saver and rotary transformer.
7.Built-in DC reactor above 11kW to increase the power factor and enhance the product reliability;
EM500\560 Series
High-Performance Vector Control Inverter
Three-phase 380~415V 0.75~630kW
The EM500 series inverter is an open-loop vector control inverter. It supports the three-phase AC asynchronous motor; a variety of drive control technologies:
improved vector VF control technology (VVF), speed sensorless vector control technology (SVC); speed output and torque output; expansions: I/O expansion cards,
and communication bus expansion cards.
The EM500 series high-performance vector inverter has the following features:
1.High torque control accuracy
2.Wide speed range and high control accuracy
3.Low-frequency carrier: VVF/1Hz/150%, SVC/0.25Hz/150%
4.Support I/O expansion
5.Support communication bus expansion: 485 bus, Profibus-DP network, CANopen network;
6.Built-in DC reactor above 11kW to increase the power factor and enhance the product reliability;
7.Support a variety of dedicated functions: constant-pressure water supply, air compressor, torque winding and unwinding, straight wire-drawing machine, etc.
EM303B Series General Inverter
EM303B is a general purpose vector control inverter. An induction motor with the help of EM303B canpossess fast speed response and torque control ability as a DC motor
which makes the motion control system stable, precise,and quick.
Main Features:
1. SVC (Sensorless vector control):Torque control accuracy: 5% rated torque. Speed control accuracy: ±0.2% rated synchronous speed.
2. VVF (Vector decoupling based VF control): The steady performanceis the same as that in SVC.
3. Wide speed regulation range, load capacity at low frequency: SVC/0.5Hz/150% rated load, VVF/1.0Hz/150% rated load.
4. Optimized current and voltage protection algorithm ensures that motor can accelerate/deceleratein 0.1S.
5. AVR function makes output voltage stable at grid voltage fluctuation.
6. Load disturbance compensation ensures failure-free operation of motor.
7. Auto-searching motor speed at restart smoothes thestart of motor without current over-shoot.
8. 2 acceleration/deceleration modes: linear and S curve.
9. The performance and stability are improved significantly with dual- CP
EM610 Special Inverter for Tension Control
>Starting from 11kW, a built-in DC reactor reduces input current distortion, improves power factor, and enhances product reliability;
> Support four optional tension control modes, closed-loop speed mode, open-loop torque, closed-loop torque and constant linear speed mode;
> Zero-speed, high-speed and small roll, large roll process to ensure constant tension of the material;
> Support 3 channels AI1, AI2, AI4 (extension card) -10V ~ +10V analog input, one channel 4 ~ 20mA current input (AI3).
> Support 9 calculation methods of coil diameter, and choose the calculation method of coil diameter reasonably according to the process requirements;
> Mechanical inertia, material inertia, static and dynamic high-speed friction compensation;
> Combined use of winding and unwinding systems, common DC bus, saving power;
> Support communication bus expansion to realize various industrial network interconnections: 485 bus, Profibus-DP network, CANopen network and DeviceNet network;
> Support multiple encoders: ABZ incremental, UVW incremental, UVW wire-saving and resolver.
M100 Special Inverter for Machine Tool Spindle
> Adapt to the working environment such as iron filings and dust;
> Strong anti-vibration ability, adapt to the vibration condition of the machine tool spindle;
> Large torque at low frequency, meeting the requirement of high torque at low frequency start;
> Built-in machine tool spindle application macro, easy to debug;
.png)
